Basic information
Model
|
Nominal diameter |
Product name |
Sales code |
LXSY 15~20 |
15mm~50mm |
Direct-reading electronic remote water meter |
F150 |
Terms of use
Water temperature: ≤40℃. Pressure≤1Mpa
Maximum allowable error
From the minimum flow rate (qmin) to the low zone excluding the boundary flow rate (qt) ±5%. ±2% from the high zone including the demarcation flow rate (qs) (±3% for the hot water meter)
Electrical related parameters
Communication rate: 2400bps
Communication distance: 300m
Working flow: (1.3-1.5)
Working voltage: 12-22v
Recommended voltage: 20v
Minimum Data storage time: unlimited
Wiring mode: M-BUS bus standard, ordinary two-core cable connection, no polarity.
Use wire: RVV2×(0.5-1m2) two-core parallel cable or two-core shielded cable, the resistance of the wire is not more than 6Ω per 100 meters.
Electromechanical conversion error: ≤±1 minimum conversion division value.
Communication protocol: "CJ/T188-2004 User Metering Instrument Data Transmission Technical Conditions" or agreed by both parties.
Main technical parameters
Model |
Caliber |
Measurement Level
|
Overload Flow
|
Common Flow
|
Boundary Flow
|
Minimum Flow
|
Min reading
|
Max reading
|
mm |
m3/h |
m3 |
LXSY-15 |
15 |
A |
3 |
1.5 |
0.15 |
60 |
0.0001 |
99999 |
B |
0.12 |
30 |
LXSY-20 |
20 |
A |
5 |
2.5 |
0.25 |
100 |
0.0001 |
99999 |
B |
0.20 |
50 |
Dimensions and weight
Model |
Caliber |
Long L
|
Wide B
|
High H
|
Connecting thread D
|
Weight Kg
|
mm |
LXSY-15 |
15 |
165 |
98 |
104 |
G/4B |
1.5 |
LXSY-20 |
20 |
190 |
98 |
106 |
G1B |
1.7 |
Installation requirements
The water meter must be installed horizontally, so that the meter’s degree number faces upward, and the arrow direction is the same as the water flow direction.
The pipeline must be flushed before the water meter is installed.
The water meter must be installed in the surrounding dry environment for easy disassembly and maintenance. It is recommended to install it in a dedicated water meter box. Valves must be installed before and after the water meter.