The double water meter is composed of two sizes of water meters; the measurement range of the water source of tap water flowing through the pipeline ranges from the minimum flow of the small diameter water meter to the maximum flow of the large diameter water meter.

When users use this water meter, they should open an account at the business office of the management department, establish a file, and purchase the corresponding water meter user. The user card must be used on the specified table when it is used for the first time, otherwise it may cause unnecessary losses.

Base table material: Wet liquid seal iron shell; Protection grade: IP67; No valve control; Separable design

The water meter uses a single-rotor flow method to record the total amount of water flowing through the hot water pipeline; the water meter case is made of copper material, which is beautiful and durable. Using magnetic sensor, stable performance and high reliability.

RLB cold and heat meters are battery-powered and can work for 5 years under normal conditions; use high-quality materials, stable and reliable performance, beautiful appearance;
built-in memory device, data can be customized storage, to ensure that no data is lost when the battery is replaced.

The cold and heat meter uses high-quality imported transducers to ensure a high standard and stability of flow measurement. There is no mechanical movement, no abrasion, not affected by bad water quality, and low maintenance cost. Low starting flow. It can be installed in horizontal and vertical directions, and the rotating meter head can meet the reading requirements in different directions.

The numerical control quantitative water meter is mainly used in the occasions where repeated water supply is needed in the industries of ceramics, textile, chemical industry, glass, etc. The water consumption can be arbitrarily set according to needs, and the operation is convenient and intuitive.

The counter has C type, E type, dry type and liquid seal for different customers to choose; this series of horizontal water meters require horizontal installation, vertical water meters require vertical installation. Choose high-quality materials, stable and reliable performance, beautiful appearance.

Parameter setting function: The management party can set the alarm water volume, recharge upper limit and other parameters in the water meter through the user's purchase of water according to his actual needs.

Parameter setting function: The management party can set the alarm water volume, recharge upper limit and other parameters in the water meter through the user's purchase of water according to his actual needs.

The IC card heating control valve is a temperature control device for heat collection metering and independent energy-saving control of heating. The product can accurately record the user's accumulated heating time, according to the control commands of the indoor thermostat.

Range ratio Q3/Q1: R80; protection grade: IP68; maximum pressure: 1.0MPa; maximum temperature grade: T30; power supply method: lithium battery; battery life: 6-8 years; base table material: brass

Nominal pressure: 2.0MPa; working medium: tap water, non-corrosive liquid, saturated steam; working temperature: -20℃≤t≤180℃;
pipe thread conforms to ISO228 standard

Nominal pressure: 1.6MPa; working medium: tap water; working temperature: 0℃≤t≤150℃;
pipe thread conforms to ISO228 standard

Nominal pressure: 1.6MPa; working medium: tap water; working temperature: 0℃≤t≤150℃

Nominal pressure: 1.6MPa; nominal diameter: 15mm; working medium: tap water;
working temperature: 0℃≤t≤60℃; pipe thread conforms to ISO7 standard

Nominal pressure: 1.6MPa; working medium: tap water;
working temperature: 0℃≤t≤60℃; pipe thread conforms to ISO7 standard

Nominal pressure: 1.6MPa; working medium: tap water;
working temperature: 0℃≤t≤150℃; pipe thread conforms to ISO228 standard